- Specifications
- Controller
- Documents and Downloads
| General Information |
| P/N: | DS03-S000-00-2 | Rated Power: | 300W |
| Rated Wind Speed: | 13.5 m/s | Rated Speed: | 835 rpm |
| Cut-In Wind Speed: | <3 m | Cut-Out Wind Speed: | 15.5 m/s |
| Survival Wind Speed: | 60 m/s(3 seconde gust) |
| Dimension/Weight |
| Rotor Diameter: | 1.24m | Rotor Height: | 1.06m |
| Mast Height(Not Included): | 4m | Total Height: | 5.06m |
| Total Weight: | 25.5 Kgs | (Mast not included) |
| Rotor Specification |
| External Darrieus: | 3 Blades |
| Internal Savonius: | 2 Layers |
| Material of Blades: | Anodized Aluminum |
| Material of Axis: | Galvanized Steel SS400/Anodized Aluminum |
| Generator Specification |
| Generator Type: | AC, 3 Phase, Synchronism PMG |
| Rated Output: | 300W |
| Braking System |
| Automatic Braking: | Over speed short circuit braking system |
| Manual Braking: | 3-phase short circuit by NFB brake |
| Operation Environment |
| Generator Temperature: | -20~40°C |
| Controller Temperature: | -10~40°C |
| Ambient Humidity: | 95% max. |
| Special Notes |
- Information and specification are subject to change without notice!
- The information provided is based on the use of our standard 4m mast, please consult your local certified engineer if you are going to install with the mast higher than 4m.
- Please follow your local regulations to install the DS-300 at proper location. Always consult your local certified civil engineer or structural engineer if you are planning to install the DS-300 on top of the roof.
| DS-300 Wind Charge Controller | |
| Model: | MAX630 |
| Battery parameter | |
| rated battery voltage | 12V / 24V self adaptation |
| wind turbine input parameter | |
| Rated Wind turbine power: | 300W/12V grade 600W/24V grade |
| Wind turbine max. rev limit | 750 rpm (DS300) |
| Rated Wind turbine input max. current limit: | 15A |
| PV input parameter: | |
| :Rated PV input current | 15A |
| Rated PV input voltage: | <=50V |
| Withdrawing power method | buck PWM function |
| User O/P | |
| output numbers | 2 outputs (individual control) |
| Rated output current | 14A (each） |
| Others | |
| Display mode | Liquid crystal display |
| Communication mode: | TTL232 |
| Controller size (L*W*H) | 175mm*148mm *84mm |
| Weight | 1.8KG |
| Special Notes |
- Information and specification are subject to change without notice!
